5
1 Antenna Allows cellular wireless communication.
2 LEDs Night lighting to obtain black and white photos
and videos.
3 Photo lens Image sensor and infrared lter.
4 Light sensor Detects the lighting conditions: color by day
and infrared by night.
5 Test light Flashes 30 seconds in PHOTO/VIDEO mode to
allow the user to leave without being photo-
graphed or recorded.
6 Signal meter Indicates the signal strengh of the cellular
network or a connection error if you see only
one signal bar ashing. (see p.9)
7 On-O Switch Allows the user to turn on/o the camera.
8 SD card slot An SD card is required to record photos/
videos
9 Fresnel lens Expands the detection area and increases the
sensitivity of the camera’s motion sensor.
10 Battery case Case for AA batteries or a rechargeable
lithium battery pack.
Micro SIM card slot A micro SIM card is required for cellular func-
tions. (included)
11 Slot for installation
strap
Allows the user to install the camera using
the installation strap included.
12 Locking latch Allows access to the front control of the
camera.
13 Cable lock hole Allows the user to install a CL-6FT cable lock,
sold separately.
14 12V power jack This camera can be powered from an external
12-volt DC input such as a 12V battery or a
12V adapter, each sold separately.
15 Tripod mount Standard ¼-20" tripod mount.
16 Battery door push
button
Allows you to access the battery compart-
ment.
Components
To Next Page
Loading...
