EasyManuals Logo

SRAM G2 RS User Manual

SRAM G2 RS
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
12
Caliper Piston Removal
NOTICE
Caliper service is only required if the pistons are damaged or if the system has been contaminated with DOT 5 or mineral oil.
If the calipers are operating normally, they do not require disassembly and service. Clean the calipers and install brake pads.
Caliper Piston Removal
NOTICE
DOT brake fluid will damage painted surfaces. If any fluid comes in contact with a painted surface (i.e. your frame) or printing on the brakes, wipe
it off immediately and clean it with isopropyl alcohol or water. Damage to painted and/or printed surfaces by DOT brake fluid is not covered under
warranty.
Insert two brake rotors into the caliper and into the rotor slot. Insert two brake rotors into the caliper and into the rotor slot.
Squeeze the brake lever to advance the pistons until they contact the Squeeze the brake lever to advance the pistons until they contact the
rotors.rotors.
Remove the rotors.Remove the rotors.
1
2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SRAM G2 RS and is the answer not in the manual?

SRAM G2 RS Specifications

General IconGeneral
Brake TypeHydraulic Disc
Lever MaterialAluminum
Caliper Design2-Piston
Brake Pad TypeOrganic
Reach AdjustYes
Rotor Size Compatibility140mm, 160mm, 180mm, 200mm

Related product manuals