Name: SRAM G2 RS
Brand: SRAM
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Caliper Brake Hose Installation

Insert the compression ﬁtting and hose into the caliper. Insert the compression ﬁtting and hose into the caliper.

Tighten the compression nut.Tighten the compression nut.

Install the rubber boot onto the compression nut.Install the rubber boot onto the compression nut.

Spray isopropyl alcohol on the caliper and clean it with a shop towel.Spray isopropyl alcohol on the caliper and clean it with a shop towel.

⚠ CAUTION

Servicing your brakes removes all of the fluid from the system. You must bleed the brakes after you service the brake caliper and/or lever.

For brake bleed and brake hose shortening instructions, visit www.sram.com/service.

8 mm ﬂare nut wrench 8 N·m (71 in-lb)

Questions and Answers:

Need help?

Do you have a question about the SRAM G2 RS and is the answer not in the manual?

SRAM G2 RS Specifications

General