EasyManua.ls Logo

SRAM Guide Ultimate - Lever Service; Parts and Tools Needed for Service; Guide Ultimate Exploded View

SRAM Guide Ultimate
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15Guide Ultimate Exploded View
Lever Service
Parts and Tools Needed for Service
• Safety glasses
• Nitrile gloves
• Oil pan
• Isopropyl alcohol
• Clean, lint-free shop towel
• SRAM® High-Performance 5.1 DOT fluid or DOT 4 Fluid, or SRAM DOT
Grease
• DOT compatible grease
• Loctite® Threadlocker Blue 242®
• Needle nose pliers
• Lever Internals Kit
• Pick with a 90 degree bent tip
• T8, T10, & T25 TORX
®
wrench
• T8 & T10 TORX bit socket
• 8 mm flare nut wrench
• 2 mm & 4 mm hex wrench
• Torque wrench
• SRAM Guide Lever Internals Assembly Tool
(install internals)
Guide Ultimate Exploded View
SRAM Guide Lever Internals Assembly Tool 15 N•m (133 in-lb) 22 mm
Bladder
Lever body
Lever return spring
Contact Point Adjustment™ dial
Reservoir bolts (2)
Reservoir cap
Detent spring
Piston assembly
Coupler
Sleeve
SwingLink™
SwingLink bushings (2)
Bleed port screws (2)
Pinch
bolt
Lever blade
Lever pivot
bolts (2)
Compression nut
Hose boot
Detent
ball
Pivot pin
SwingLink
push rod
Lever pivot hole (2)
SwingLink pivot hole (2)
Bleed port
SRAM Guide Ultimate - Lever Service; Parts and Tools Needed for Service; Guide Ultimate Exploded View