36Lever Blade Installation
Install the compression fitting and nut into the lever.
Tighten the compression nut.
Clean the lever.
Slide the hose boot onto the compression nut.
⚠ CAUTION
Servicing your brakes removes all of the fluid from the system. You must bleed the brakes after you service the brake caliper and/or lever.
For brake bleed, brake hose shortening, and brake pad replacement instructions, visit www.sram.com/service.
This concludes the Level™ Ultimate, Level TLM, and Level TL Brake Service,
14
To Next Page
Loading...
