47
Charger 2 Damper Installation - Crown
200 Hour Service Charger 2 Damper Installation - Crown
Install the Charger 2 Damper into the damper side upper tube. Install the Charger 2 Damper into the damper side upper tube.
Install the top cap and tighten. Install the top cap and tighten.
RL:RL: Install the lockout adjuster knob on the top cap so the knob rotates Install the lockout adjuster knob on the top cap so the knob rotates
from open to closed. Install and tighten the retention screw.from open to closed. Install and tighten the retention screw.
200 Hour Service Continue the 200 Hour Service with Lower Leg Installation.
1
2
Top Cap/Cassette Tool 28 N.m (250 in-lb)
2 mm 1.4 N·m (12 in-lb)
3
To Next Page
Loading...
