EasyManua.ls Logo

SRAM Rockshox SID SL - Lower Leg Assembly Process; Lower Leg Installation Steps

SRAM Rockshox SID SL
69 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
62
Lower Leg Assembly
Lower Leg Assembly
50/200 Hour Service Lower Leg Installation
Clean the upper tubes.Clean the upper tubes.
Apply grease to the inner surfaces of the wiper seals.Apply grease to the inner surfaces of the wiper seals.
Wiper seals may already be greased from the factory. Wiper seals may already be greased from the factory.
Do not apply extra grease to seals that already have Do not apply extra grease to seals that already have
grease on them.grease on them.
Install the jounce bottom out bumper and bottom cup on the air spring Install the jounce bottom out bumper and bottom cup on the air spring
shaft, if necessary.shaft, if necessary.
1
2
RockShox Dynamic Seal Grease
3

Related product manuals