SRAM Rockshox SID SL - 200 Hour Service: Charger Damper RL Installation; Charger Damper RL Installation

60
Damper Installation
200 Hour Service Damper Installation
Install the Charger Damper RL or RL R assembly into the damper side Install the Charger Damper RL or RL R assembly into the damper side
upper tube. Thread the top cap into the upper tube and tighten it.upper tube. Thread the top cap into the upper tube and tighten it.
RLRL: Install the adjuster knob with the tab in the 7-8 o'clock, unlocked : Install the adjuster knob with the tab in the 7-8 o'clock, unlocked
position.position.
Install and tighten the retaining screw.Install and tighten the retaining screw.
1
RL: Top Cap/Cassette Tool 28 Nm (250 in-lb) RL R: 24 mm
RL
2
2.5 mm 1.4 Nm (12 in-lb)