54
Damper Service
Remove the o-rings from the compression damper and discard them.Remove the o-rings from the compression damper and discard them.
Apply grease to new o-rings and install them.Apply grease to new o-rings and install them.
Remove the glide ring from the rebound damper piston and discard it. Remove the glide ring from the rebound damper piston and discard it.
Install a new glide ring.Install a new glide ring.
Apply grease to the inner seal and bushing in the new rebound Apply grease to the inner seal and bushing in the new rebound
damper seal head.damper seal head.
7
8
9
To Next Page
Loading...
