7-8
Seatback Reclining Adjustment Head Restraint Adjustment
SECOND ROW SEAT (7-SEATERS)
Seat Turning
Seat Slide Adjustment
To move the seat forward or
backward, pull and hold the seat
slide lever up and move the seat
as required. Then, release the
lever in desired position.
To make the second row seat fac-
ing rearwards, pull up the lever
and turn the seat until it clicks.
To change the seatback angle,
lean forward slightly and raise the
lever . Then, lean back to the
desired angle and release the
lever. This lever is designed to
adjust the seatback up to a cer-
tain angle.
To raise the head restraint, pull it up
without pressing the release button.
To lower the head restraint, press the
release button
on top of seatback
and push the head restraint down.
Make sure that the seat is completely
locked.
WARNING
Seat Under Tray
The seat under trays are located under
the seat at both sides. Use the trays to
store some personal properties.
* Locations of cup holder may vary according to the seats.
A120_RHD_07-Seats.p65 2006-10-02, ¿ÀÀü 11:05Page 8 Adobe PageMaker 6.5K/Win
To Next Page
Loading...
Need help?
General
