1 Features
• STM32H7S3L8H6 microcontroller based on the Arm
®
Cortex
®
‑M7 core, featuring 64 Kbytes of flash
memory and 620 Kbytes of SRAM in a TFBGA225 package
• 256‑Mbit Octo‑SPI flash memory
• USB Type-C
®
with USB 2.0 HS interface, dual‑role‑power (DRP)
• Three user LEDs
• RESET and USER push-buttons
• 24 MHz and 32.768 kHz crystal oscillators
• Board connectors:
–
USB Type-C
®
connector
– Ethernet RJ45 connector
– MIPI20 for debugging (SWD/JTAG/TRACE)
–
ST Zio expansion connector including ARDUINO
®
Uno V3
– ST morpho extension pin headers for full access to all STM32 I/Os
• Flexible power-supply options: ST-LINK USB V
BUS
, USB connector, or external sources
• On-board STLINK-V3EC debugger/programmer with USB re-enumeration capability: mass storage, Virtual
COM port, and debug port
• Comprehensive free software libraries and examples available with the STM32Cube MCU Package
• Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded
Workbench
®
, MDK-ARM, and STM32CubeIDE
Note: Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
UM3276
Features
UM3276 - Rev 1
page 2/40
To Next Page
Loading...
