ST NUCLEO-H7S3L8 - Expansion connectors; Zio connectors supporting ARDUINO Uno V3

7 Expansion connectors
Six expansion connectors are implemented on the STM32H7Rx/7Sx Nucleo-144 board:
•
Zio connectors (CN7, CN8, CN9, and CN10) supporting ARDUINO
®
Uno V3
• ST morpho expansion connectors (CN11 and CN12).
7.1
Zio connectors supporting ARDUINO
®
Uno V3
The Zio connectors (CN7, CN8, CN9, and CN10) are female connectors supporting the ARDUINO
®
Uno
standard. Most shields designed for ARDUINO
®
can fit the Nucleo board.
Caution: Most of the STM32 microcontroller I/Os are 5V‑tolerant, but a few of them are only 3V3‑compatible, while
ARDUINO
®
Uno is 5V‑compatible. Refer to the STM32H7Sx product datasheets for their I/O structure.
Figure 11. Zio connectors supporting ARDUINO
®
Uno
DT59259V1
Zio connectors supporting
ARDUINO
®
Uno V3
Power part (CN8)
Zio connectors supporting
ARDUINO
®
Uno V3
Analog part (CN9)
Zio connectors supporting
ARDUINO
®
Uno V3
Digital part (CN7)
Zio connectors supporting
ARDUINO
®
Uno V3
Digital part (CN10)
UM3276
Expansion connectors
UM3276 - Rev 1
page 25/40