ST STLINK-V3SET User Manual

February 2021 UM2448 Rev 6 1/49
1
UM2448
User manual
STLINK-V3SET debugger/programmer for STM8 and STM32
Introduction
The STLINK-V3SET is a stand-alone modular debugging and programming probe for the
STM8 and STM32 microcontrollers. This product is composed of the main module and the
complementary adapter board. It supports the SWIM and JTAG/SWD interfaces for
communication with any STM8 or STM32 microcontroller located on an application board.
The STLINK-V3SET provides a Virtual COM port interface allowing the host PC to
communicate with the target microcontroller through one UART. It also provides bridge
interfaces to several communication protocols allowing, for instance, the programming of
the target through the bootloader.
The STLINK-V3SET can provide a second Virtual COM port interface allowing the host PC
to communicate with the target microcontroller through another UART (called bridge UART).
Bridge UART signals, including optional RTS and CTS, are available on the adapter board
only (MB1440). The second Virtual COM port activation is done through a reversible
firmware update, which also disables the mass storage interface (used for drag-and-drop
Flash programming).
The modular architecture of STLINK-V3SET enables the extension of its main features
through additional modules such as the adapter board for different connectors, the B-
STLINK-VOLT board for voltage adaptation, and the B-STLINK-ISOL board for voltage
adaptation and galvanic isolation.
Figure 1. STLINK-V3SET product top view
Picture is not contractual.
www.st.com

ST STLINK-V3SET Specifications

General

Brand	ST
Model	STLINK-V3SET
Category	Motherboard
Language	English

Summary

Introduction

Features

General Information

Ordering Information

Development Environment

System Requirements

Lists the required operating systems and hardware for the STLINK-V3SET.

Development Toolchains

Specifies the supported software development tools and IDEs for the STLINK-V3SET.

Conventions

Quick Start

STLINK-V3SET Functional Description

STLINK-V3SET Overview

Provides a general overview of the STLINK-V3SET debugger/programmer, its features and capabilities.

Hardware Layout

Details the hardware components and layout of the STLINK-V3SET main module (MB1441).

STLINK-V3SET Functions

Details the various functions and protocols supported by the STLINK-V3SET.

Board Connectors

Connectors on MB1441 Board

Details the user connectors available on the MB1441 board, including USB Micro-B and STDC14.

Connectors on MB1440 Board

Details the 9 user connectors available on the MB1440 board for various communication protocols.

Flat Ribbons

Mechanical Information

Software Configuration

Supporting Toolchains (not exhaustive)

Lists the toolchain versions that support the STLINK-V3SET, including minimum required versions.

Drivers and Firmware Upgrade

Explains the need for driver installation and firmware updates for the STLINK-V3SET.

STLINK-V3SET Frequency Selection

Describes the different operating frequencies for the STLINK-V3SET and their implications.

Mass Storage Interface

Details the virtual mass storage interface for drag-and-drop programming of STM32 flash memory.

Bridge Interface

Explains the USB interface for bridging functions to STM32 target protocols like SPI, I2C, CAN, UART, and GPIOs.

B-STLINK-VOLT Board Extension Description

B-STLINK-VOLT Features

Highlights the key features of the B-STLINK-VOLT voltage adapter board for the STLINK-V3SET.

B-STLINK-VOLT Connection Instructions

Provides step-by-step guides for connecting the B-STLINK-VOLT board with the STLINK-V3SET.

B-STLINK-VOLT Closed Casing for STM32 Debug

Instructions for assembling the STLINK-V3SET with B-STLINK-VOLT in a closed casing.

B-STLINK-VOLT Opened Casing for All Connectors

Instructions for assembling the STLINK-V3SET with B-STLINK-VOLT using the MB1440 adapter.

B-STLINK-VOLT Bridge GPIO Direction

Explains how to manually configure the direction of bridge GPIO signals on the B-STLINK-VOLT board.

B-STLINK-VOLT Jumper Configuration

Details the jumper settings on the MB1441 main module when using the B-STLINK-VOLT board.

B-STLINK-VOLT Target Voltage Connection

Specifies how to provide target voltage to the B-STLINK-VOLT board for proper operation.

B-STLINK-VOLT Board Connectors

Describes the connectors on the B-STLINK-VOLT board (MB1598) and their relation to other boards.

B-STLINK-ISOL Board Extension Description

B-STLINK-ISOL Features

Highlights the features of the B-STLINK-ISOL voltage adapter and galvanic isolation board.

B-STLINK-ISOL Connection Instructions

Provides step-by-step guides for connecting the B-STLINK-ISOL board with the STLINK-V3SET.

B-STLINK-ISOL Closed Casing for STM32 Debug

Instructions for assembling the STLINK-V3SET with B-STLINK-ISOL in a closed casing.

B-STLINK-ISOL Opened Casing for All Connectors

Instructions for assembling the STLINK-V3SET with B-STLINK-ISOL using the MB1440 adapter.

B-STLINK-ISOL Bridge GPIO Direction

Explains the fixed hardware direction of bridge GPIO signals on the B-STLINK-ISOL board.

B-STLINK-ISOL Jumper Configuration

Details the jumper settings on the B-STLINK-ISOL board (MB1599) for JTAG clock path configuration.

B-STLINK-ISOL Target Voltage Connection

Specifies how to provide target voltage to the B-STLINK-ISOL board for proper operation.

B-STLINK-ISOL Board Connectors

Describes the connectors on the B-STLINK-ISOL board (MB1599) and their relation to other boards.

Performance Figures

Global Overview

Provides an overview of achievable maximal performances with STLINK-V3SET on different communication channels.

Baud Rate Computing

Explains how to compute baud rates for VCP and SWV interfaces aligning with target baud rates.

STLINK-V3SET, B-STLINK-VOLT, and B-STLINK-ISOL Information

Product Marking

Describes the stickers on the PCB providing product order code, identification, and revision information.

STLINK-V3SET Product History

Details the product identification and limitations for the STLINK-V3SET.

B-STLINK-VOLT Product History

Details the product identification and limitations for the B-STLINK-VOLT board.

B-STLINK-ISOL Product History

Details the product identification and limitations for the B-STLINK-ISOL board.

Board Revision History

Lists the revision history for the MB1441, MB1440, MB1598, and MB1599 boards.

Appendix A Federal Communications Commission (FCC)

FCC Compliance Statement

Provides FCC compliance statements, including Part 15.19, 15.21, and 15.105 regulations.

Revision History