ST STLINK-V3SET - Revision History

Revision history UM2448
48/49 UM2448 Rev 6
Revision history
Table 20. Document revision history
Date Revision Changes
6-Sep-2018 1 Initial release.
8-Feb-2019 2
Updated:
Section 8.3.4: Virtual COM port (VCP),
Section 8.3.5: Bridge functions,
Section 9.1.2: STDC14 (STM32 JTAG/SWD and VCP),
Section 9.2.3: Virtual COM port connector explaining
how Virtual COM ports are connected to the target.
20-Nov-2019 3
Added:
Second Virtual COM port chapter in Introduction,
Figure 13 in Section 8.3.5 Bridge UART and
Figure 15 in the new section of Mechanical information.
19-Mar-2020 4
Added:
Section 12: B-STLINK-VOLT board extension
description.
5-Jun-2020 5
Added:
Section 12.5: Target voltage connection,
Section 12.6: Board connectors.
Updated:
Section 1: Features,
Section 3: Ordering information,
Section 8.2.7: UART/I
2
C/CAN bridge connector,
Section 13: STLINK-V3SET and B-STLINK-VOLT
information.
5-Feb-2021 6
Added:
Section 13: B-STLINK-ISOL board extension description
Figure 19 and Figure 20
Section 14: Performance figures
Updated:
Introduction
Ordering information
Figure 16 and Figure 17
Section 15: STLINK-V3SET, B-STLINK-VOLT, and B-
STLINK-ISOL information
All modifications linked to the latest
B-STLINK-ISOL
board for voltage adaptation and galvanic isolation