Bootloader description AN2662
12/83 Doc ID 14156 Rev 1
1.5 Exiting System Memory boot mode
System Memory boot mode must be exited in order to start execution of the application
program. This can be done by applying a hardware reset. During reset, the BOOT pins
(BOOT0 and BOOT1) must be set at the proper levels to select the desired boot mode (see
Tabl e 1). Following the reset, the CPU starts code execution from the boot memory located
at the bottom of the memory address space starting from 0x0000 0000.
To Next Page
Loading...
Need help?
General
