DocID030511 Rev 1 7/69
UM2198 Product marking
68
2 Product marking
Evaluation tools marked as “ES” or “E” are not yet qualified and therefore not ready to be
used as reference design or in production. Any consequences deriving from such usage will
not be at ST charge. In no event, ST will be liable for any customer usage of these
engineering sample tools as reference design or in production.
“E” or “ES” marking examples of location:
• On the targeted STM32 that is soldered on the board (for illustration of STM32 marking,
refer to the STM32 datasheet “Package information” paragraph at the www.st.com
website).
Next to the evaluation tool ordering part number that is stuck or silk-screen printed on the
board.
3 System requirements
• Windows
®
OS (XP, 7, 8 and 10), Linux
®
or MacOS
™
• USB Type-A to Micro-B cable
4 Development toolchains
• ARM
®
Keil
®
: MDK-ARM
(a)
• IAR
™
: EWARM
(a)
• GCC-based IDEs: free SW4STM32 from AC6
5 Demonstration software
The demonstration software is preloaded in the STM32H743XI Flash memory for easy
demonstration of the device peripherals in standalone mode. The latest versions of the
demonstration source code and associated documentation can be downloaded from the
www.st.com website.
a. On Windows
®
only.
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.
To Next Page
Loading...
Need help?
General
