Conclusion AN4943
20/22 DocID029937 Rev 2
6 Conclusion
This application note gives a guideline to easily transfer images to an LCD-TFT display via
the FSMC interface using the Chrom-ART Accelerator™ (DMA2D) without using the CPU or
the DMA resources. A focus is given to the correct control of the 'Data/command control'
signal of the LCD-TFT display. Some code examples have also been provided to setup the
Chrom-ART Accelerator™ (DMA2D).
This application note also presents the new byte reordering features of the DMA2D allowing
to support an update of 16.7M color and 262k color Intel 8080 displays directly through the
FSMC.