Introduction
This application note is intended for system designers who require a hardware implementation overview of the development
board features, such as power supply, clock management, reset control, boot mode settings and debug management.
This document details how to use the STM32U575xx and STM32U585xx microcontrollers (also named STM32U575/585) and
describes the minimum hardware resources required to develop an application using these MCUs.
Detailed reference design schematics are also contained in this document with descriptions of the main components, interfaces
and modes.
Getting started with STM32U575/585 MCU hardware development
AN5373
Application note
AN5373 - Rev 1 - June 2021
For further information contact your local STMicroelectronics sales office.
www.st.com
To Next Page
