Stahl SLE22 - Mechanical Data

10 Technical data
10.2013 27
BA_SLE22_EN.DOCX
10.2 Mechanical data
Dimensions
100 x 110 x 75 mm (W x H x D
)
Protection type
IP 20, EN 60 529
Connection terminals
–
30
box terminals with captive plus
-
minus screws
(tightening torque 0.5 Nm)
– per box terminal: 1 x 4 mm2 solid or 1 x 2.5 stranded wire with sleeve DIN 46 228
or 2 x 1.5 mm2 stranded wire with sleeve DIN 46 228
Attachment
Top
-
hat rail
EN 50022
Weight
0.
5 kg
Mounting position
Horizontal, vertical
Maxim
um cable
length per input
- control cable, signal relay
- temperature inputs
- sensor inputs (shielded)
100m
50 m
50 m