Stairmaster STEPMILL 7000 PT - Service, Cleaning, and Lubrication Procedures

•
MAINTENANCE INSTRUCTIONS
INITIAL SERVICE
Upon receiving your machine, use a soft, clean towel to wipe off the dust which may
have accumulated during shipping . Your new machine will require minor assembly. Refer
to the "In stallat i on Instructions" section of this Manual for details.
PREVENTIVE MAINTENANCE
The procedures for performing the recommended preventive maintenance are summa-
rized in Table 5. The schedule is based on normal usage in a commercial health club
env i ronment; adjust the schedule to meet actual machine usage. Refer to the "Parts
Removal and Replacement " section of this Manual for all disassembly and assembly
instructions.
Cleaning and Inspecting
2. Clean the exterior of your Stepmill ~ 7000 PT '" exercise system daily with soap
and water.
•
1.
DO NOT USE GLASS CLEANERS OR ANY OTHER HOUSEHOLD CLEANER ON THE
CONSOLE. Clean the console daily with a water-dampened cloth and wipe dry
after cleaning .
•
3. Thoroughly clean the entire machine at least once a week .
4. Inspect the painted surfaces of the exposed frame for any rust, bubbling or
chips during the weekly cleaning . The salt in perspiration can damage the
unpainted surfaces. Repair the damaged area with a touch - up kit provided by
StairMaster ~ Sports/Medical Products, Inc . Refer to the Parts Key for the
touch - up kit part number.
5. Clean the step hinges carefully. Perspiration tends to accumulate in the
hinges , and this can lead to eventual corrosion.
6. Inspect the Poly-V belt for excessive wear during the weekly cleaning . Adjust
WARNING
TO AVOID INJURY DUE TO SLIPPERY PEDAL SURFACES, DO NOT USE
PETROLEUM-BASED CLEANERS OR ARMORALL-TYPE PROTECTANTS
Page 25