Page 25
ROAD RACE
1. The Road Race is a unique program that places the user in a race
against a computer pacer.
2. The Road Race uses a resistance system that increases the
resistance as you pedal faster, just like a real bicycle. The faster you
pedal, the heavier the resistance, and the faster you will travel.
3. Start the Road Race program by pressing [ROAD RACE] and then
[ENTER]. Input your weight, and the total race distance in miles (or
Kilometers, if your console is set to metric units).
4. Enter the level. You can change the pacer's speed at anytime during
the race. Use the [+ ARROW] or [- ARROW] to change the speed.
5. The console will be count down to the start of the race. Start
pedaling when the word “GO !” appears in the text bar.
6. Three lights will appear at the bottom of the display. The two outside
dots are you, and the inside dot is the pacer. Your progress, and the
pacer’s, is shown by lit LEDs.
7. Each lap of the display area is 0.25 miles (0.25 kilometers)
8. When the cyclist or the pacer enters the last lap, the entire track lights
up. As the finish line is approached, each LED corresponding to the
current position is turned off.
9. The race ends when you cross the finish line. The race results are
shown on the text bar during the cool down period. The results are
stored until the next workout is started. Press [WORKOUT STATS] to
review your results.
STRATUS SYSTEMS CONSOLE
To Next Page
Loading...
