workout (5-99 minutes), user weight, maximum speed desired and maximum level desired. The workout will
begin at a low speed and level, and the TreadClimber will adjust the Speed and Level as you go. Speed and
Level can also be adjusted manually at any time.
HEART RATE TRAINING PROGRAMS
The TreadClimber offers two HR training programs.
NOTE: For best results, use a HR strap. Contact
HR grips may provide a less accurate reading
CONSTANT HEART RATE CONTROL
This program is designed to maintain your HR at a constant level by varying your walking speed over the
course of the workout. Note that your HR will vary above and below the target rate during the program.
When you select this program, the console will prompt you to enter the total time desired for the workout
(5-99 minutes), user weight and your target HR (70-200 Beats per Minute). When all parameters are entered,
the workout will begin and continue for the time entered.
HEART RATE INTERVALS
This program is designed to gradually elevate your heart rate to the upper end of your selected training
range, then gradually decrease your heart rate to the lower end of your training range by setting Incline
Level to 5 and varying speed. During the workout, this cycle will repeat several times, creating an interval
training effect that is customized to your desired training range.
When you select this program, the console will prompt you to enter the total time desired for the workout
(5-99 minutes), user weight and your Lower and Upper Target HR (70-200 Beats per Minute). When all
parameters are entered, the workout will begin and continue for the time entered.
NOTE: during setup, there must be at least an 18 BPM difference between the lower and upper HR limits to
ensure an interval workout.
To Next Page
Loading...
