Stairmaster TreadClimber - Settings and Calibration; Manager and Maintenance Modes

SETTINGS AND TESTING
After having used your TREADCLIMBER® for many workouts, you may wish to change some of
its settings
MANAGER MODE
The Manager Mode allows you to query and modify the basic settings of your unit. To enter
Manager Mode:
1. Press and hold the , and keys together.
2. A beep will sound and “MANAGER MODE” will display momentarily in the Information
Window.
3. Release the keys. “MCI VX.XX CKSM XXXX” will display in the Information Window.
NOTE: The system will automatically exit Manager Mode if no key is pressed for 30 seconds.
The following keys are available in MANAGER MODE:
Incline Keys: Displays the next and previous parameter, respectively. Keys will repeat if held.
Speed Keys: Adjust the value of the displayed parameter up and down, respectively, in
increments of 1 unit or 0.01 unit, as appropriate for the parameter. These keys do not save the
new value - see Key below.
OK Key: Updates (saves) the value of the displayed parameter in Flash memory. Alternatively,
the START key may be used (see above).
Number/Program Select Keys: Enter new data item values for numeric parameters.
Stop Key: Exits Manager Mode and restarts the TreadClimber greeting.
The items that you may display and change with the previous keys are:
Item Lowest
Value
Default
Value
Highest
Value
Meaning
MC1 V X.XX N/A N/A N/A Display’s primary processor software version and checksum.
LCB V X.XX
N/A
N/A
N/A
Display’s secondary processor software version and checksum.
SERIAL NO
0
0
65,535
TreadClimber serial number.
UNITS
-
ENGLISH
-
English = units of pounds, miles, hours, minutes, seconds, feet, inches;
Metric = units of kilograms, kilometers, hours, minutes, seconds,
centimeters.
TIME
5
99
99
Maximum time in minuts allowed for program, including warm-up.
WEIGHT
1
155/70
500/226
Default (to user), typical weight in lb (UNITS=English), or kg
(UNITS=Metric).
42