1. To store the PT 1690, simply keep it in a clean dry place.
2. Use two people to lift from the DIP STANDS(5) and UPRIGHTS(2) on both sides to move the PT
1690.
The safety and integrity designed into the PT 1690 can only be maintained when the PT 1690 is regularly
examined for damage and wear. Special attention should be given to the following:
1. Verify that the WARNING LABEL(26) is in place and easy to read. Call Stamina Products immediately
at 1-800-375-7520 for a replacement WARNING LABEL(26) if it is missing or damaged.
2. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
3. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Securely tighten loose nuts and bolts.
4. Worn or damaged components shall be replaced immediately or the PT 1690 removed from service
until repair is made.
5. Only Stamina Products supplied components shall be used to maintain/repair the PT 1690.
6. Keep your PT 1690 clean by wiping it off with an absorbent cloth after use.
STORAGE
MAINTENANCE
9
To Next Page
Loading...
