Stanley 3 Series User Manual

Component Replacement
Padlock Service Manual 2–19
Disassembling
Lubricating
padlock parts
Apply one quick spray of BD660 Corrosion Free Formula 8000
Industrial Lubricant in both shackle holes every six months. The shackle
can be in either the locked or unlocked position. It is not necessary to
disassemble the padlock in order to lubricate it.
Note: Lubricate more often if the padlock is used frequently or is located
in a corrosive environment.

Stanley 3 Series Specifications

General

Brand	Stanley
Model	3 Series
Category	Locks
Language	English