31
FAULT CODES - REMOTE CONTROL
FAILURE
CODE
DURATION
DISPLAYED
SYMPTOM POSSIBLE CAUSE
F04 4 sec No Pilot Flame within 30 seconds.
See “Pilot Light will not Light” on
Fault Finding Section
F06 4 sec 3 Failed Ignition Sequences within 5
minutes.
F09 4 sec Fire is not responding. Remote Control not synced to
Burner. (See Pairing the Remote
Control Section)
F40
(Battery Symbol
shown)
Permanent Low Battery on Remote Control See Battery Replacement Section.
F46 4 sec Fire is not responding or only
responding intermittently.
Bad Connection between Remote
Control & Burner.
Battery Low on Gas Control Valve
(See Battery Replacement Section)
To Next Page
Loading...
