Compulevel
TM
Measurement system • 20
Elevation
ELEV
ELEVATION lets you preset the display to a benchmark elevation in
engineers (FT) or metric scales for use in the CARRY function.
To enter or exit the ELEV function, press and hold the SCALE and RES keys
together for two seconds.
Notes: It’s best to set digits starting with the least significant: momentarily
press the HOLD key to set the hundredths digit, press the MARK key to set
tenths, the REC key for ones, the CAL key for tens, the SCALE key for
hundreds and the RES key for thousands. Press the ZERO key to select up
or down.
To use your preset elevation, exit ELEVATION and enter CARRY
(see page 16).
ELEV
Allows preset of elevation in CARRY function.
First place measurement module at benchmark.
Press 2 seconds to Enter or Exit
Display looks like CARRY function:
Example reading: 17,469.80 (a very high elevation!)
End set her
e
Start set here
Upper display
Alternates
Lower display
E for elevation
SCALERES
UP
DOWN
ON
OFF
100’1000’
10’ 1’ 0.1’ 0.01’
To Next Page
Loading...
Need help?
General
