- 24 -
• In case of MANDREL, JAW, OVERHAUL
It counts up the counter despite the
assessment result is OK or NOK.
If the counter value reaches a setting value, the following alarm messages are shown in the
screen.
Use these alarms as a guide to know the timing of maintenance etc.
Touch the screen somewhere to clear the alarm and do maintenance work accordingly.
18. Reset counter values
You can reset the counter values on the way before reaching the setting values.
• In case of Poka-Yoke, Service1, Service2,
Service3, MANDREL, JAW, OVERHAUL
Touch the current counter value.
The window switches to “Reset
conformation” window.
If “Yes” character string is touched, the
counter value is reset and is back in home
screen.
MANDREL
Alarm for emptying collector
MANDREL
Alarm for Jaw maintenance
MANDREL
Alarm for Overhaul
To Next Page
Loading...
