- 8 -
Outline
PB2500 Smart is a Battery Power Rivet Tool which has a light weight with Rivet assessment
function and Counter function. It enables to set some values from the touch screen easily.
Additionally, 500,000 setting data can be stored in a memory in the tool and they can be
extracted through USB connection to in your PC.
Capability and Nose equipment are common with the current PB2500, if the users who use the
current PB2500, buying new nose components are not necessary.
You can also use Wi-Fi or Bluetooth (BLE) function by downloading an Android App “Stanley
Super Visor” in Google Play.
Precautions for use
This tool has the capability to verify measurements. STANLEY Engineered Fastening does not
assure the value and accuracy of Break-load and Stroke displayed. In addition, STANLEY
Engineered Fastening cannot provide the range of Break-load and Stroke for each rivet. The
limits must be set by the tool operator as a means to prevent the release of defective products,
abnormal fastening or to detect abnormalities of the tool. Examples of tool abnormalities
include jaw slip or the requirement to return the tool for maintenance.
Rivets with a low breaking load (less than 3,000N such as an Aluminum rivet 4.0mm size etc.)
may not show the rivet curve correctly. If the rivet curve and assessment are not required or
the rivet curve does not show correctly, only the counter function can be used.
Rivets with extremely low load (less than 2,000N such as Aluminum rivet 3.2mm etc.) the
counter display will not function correctly.
Smart tool operates with the screen displays a counter only, if it does not operate even if
you pull the trigger, check the screen if it shows a counter.
Other instructions or Cautions for the tool, Read the instruction manual for the
tool.
To Next Page
Loading...
