Set page length to n lines
Mode ASCII
Decimal Hexadecimal
Both
<ESC> “C”
/1 27 67 n IB 43 n
Sets the page length ton lines in the current linespacing, where n is
between 1and 127.
‘Changing the line spacing later does not alter the physical page
length. The current line becomes the top of the page.
Set page length to n inches
IMode I ASCII
I Decimal
I Hexadecimal I
I Both I
<ESC>
“c” <0> n
27 67 0 n la 43 00 n
Sets the page length to n inches, where n is between 1 and 32 in
Standard mode or between 1and 64 in IBM mode. The current line
becomes the top of the page.
Set bottom margin
IMode /
ASCII
Decimal Hexadecimal
IBoth I <ESC> “N” n
I 27 78 n I IB 4E n I
Sets the bottom margin ton lines, where n is between 1 and 127in
Standard mode or between 1 and 255 in IBM mode. The bottom
margin is reset when you change the page length.
Cancel bottom margin
Mode ASCII Decimal
Hexadecimal
Both
<ESC> “O”
27 79 IB 4F
Cancels the bottom margin.
100
To Next Page
Loading...
