I
Installing the paper guide
Follow the procedure below to install the paper guide:
1. Insert the two slotson either side of the paper guide into the two tabs on
the rear cover.
2. Place the paper guide horizontally, as shown in Figure 2-10.
Figure 2-70. Installing the paper guide horizontally.
Installing the mute cover
Follow the procedure below to install the mute cover:
1. Insert the tab on the Ieft side of the mute cover into the hole on the front
cover.
2. Insert the other tab into the slot on the front cover.
3. Swing down backward to close the mute cover.
Figure 2-11. Install the tabs on the mute cover, then swing down to close it.
Leave the front and mute covers closed during normal operation. The cover
keeps outdust and dirt and reduces the printer’s operating sounds.Open the
cover only to change the ribbon or make an adjustment.
16
To Next Page
Loading...
