Star Micronics LC24-20 - Proportional Spacing Table

PROPORTIONAL SPACING TABLE
This table lists the widths of your printer’s proportional characters, for
Standard mode and IBM mode.
The values giken are in 360thsof an inch. For example, a value of 36 is 36/
360thsof an inch. You may need to enter these widths intoa special table for
your processing program so it can calculate the number of proportional
characters that will fit on a line.
The following width table shows each character, its ASCII code (decimal)
for each character set, and its width for Standard normal mode, Standard
super/subscript mode. and IBM mode.
Character code
Chr.
L
Proportional
width
Std. #437 #850 #860 #861
#863 #865 lmal hperlSulIBM
o 0 0 0 0 0
0 30 20 30
1 1 1 1 1 1
@ 30 20 30
7
&
2 2 2 2 2
~ 30 20 30
—
3 3 3 3 3 3
v 30 20 30
—
4 4 4 4 4 4
+ 30 20 30
—
5 5 5 5 5 5
+ 30 20 30
6 6 6 6 6 6
4 30 20 30
7 7 7 7 7 7
● 30 20 30
8 8 8 8 8 8
0 30 20 30
9 9 9 9 9 9
“ 30 20 30
—
10 10
10 10 10 10
Q
30 20 30
—
11 11
11 11 11 11
!? 30 20
30
—
12 12 12 12 12 12 9 30 20
30
—
13 13 13 13 13“ 13
) 30 20 30
14 14 14 14 14 14
fi 30 20 30
—
15 15 15 15 15 15
~ 30 20 30
—
16 16 16 16 16 16
➤ 30 20 30
—
17 17 17 17 17 17
4 30 20 30
18 18 18 18 18 18 1 30 20 30
19 19 19 19 19 19 !! 30 20 30
162