Star Micronics LC24-20 - Character Set Commands

CHARACTER SET COMMANDS
Select standard character set
Mode ASCII Decimal Hexadecimal
Both <ESC>
“t”
<o> 27 116 0
IB 74 00
Std.
<FS> “I” <O> 28 73 0
Ic 49 0
Selects the standard character set. This is the power-up default in
Standard mode if EDS switch D-1 is set to OFF.
Select IBM character set
Mode
ASCII
Decimal
Hexadecimal
Both
<ESC> “t” <1> 27 116 1
IB 74 01
Std.
<FS> “I” <1>
28 73 1
IC 49 01
Selects an IBM character set. This is the power-up default in IBM
mode, or EDS switch D-1 is set to ON in standard mode.
Select character set #l
Mode
ASCII Decimal Hexadecimal
Both
<ESC> “7” 27 55 IB 37
Selects character set #1.
Select character set #2
Mode ASCII Decimal
Hexadecimal
Both <ESC> “6”
27 54 IB 36
Selects character set #2.
87