EasyManua.ls Logo

Star Micronics LC24-20 - Page 115

Star Micronics LC24-20
194 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1-
Set horizontal tab stop every n columns
Mode
ASCII
Decimal
Hexadecimal
std.
<ESC> “e” <0> //
27 101 0 )1
IB 65 00 r?
Cancels allcurrent horizontal tab stopsand sets new tab stopsevery
n columns, where n is between 1 and 127.
Reset all tab stops
Mode I ASCII
Decimal Hexadecimal
1
I IBM <ESC> ‘“R” 27 82
IB 52
Resets the horizontal tab stops to their power-up values in which a
tab stop is set every 8 column starting at column 9. Also clears all
vertical tab stops.
Horizontal tab
Mode
ASCII
Decimal Hexadecimal
Both <HT>
9 09
Moves the print position to the next horizontal tab stop. Ignored if
there isno nexthorizontaltab stop inthecurrent line.Notethatwhen
underlining is selected, spaces skipped by horizontal tabulation are
not under]ined.
Relative horizontal tab
Mode
ASCII
Decimal Hexadecimal
Std.
<ESC>
“’/” 1![
,,~
27 92 H/ //2
IB 5C /// //2
Moves the print position right or left a specified distance. Ignored if
theresultingpositionisbeyondtherightor leftmargin.The formulas
for the distance and direction are as follows:
If 122is between ()and 63, the print head moves right by (~?l+ 112x
256) dots.
If you want to move the print head to the left,}?land )12are obtained
by subtracting the value from 65536, and dividing the result into
high and low bytes.
107

Table of Contents

Related product manuals