Set print start position on ASF
Mode ASCII
Decimal Hexadecimal
Both
<ESC> <EM>“T” /?
27 25 84 n
IB 19 54 n
Skipsn/6 inches at the top of the page, where n isequal to or greater
than 1.Ignored if EDS switch A-5 is ON.
Reset printer
Mode ASCII
Decimal
Hexadecimal
Both
<ESC> “@” 27 64
IB 40
Std.
<FS>
“@”
28 64
IC
40
Reinitializes the printer. Clears the print buffer and returns settings
to their power-up values. Does not clear the input buffer or change
ASF selections.
Set initial conditions
Mode ASCII
Decimal Hexadecimal
IBM
<ESC> “[” “K” <3> 27 91 75 3
IB 5B 4B 03
<O> <O> nl ni?
o 0 nl n2 00 00 nl n2
Reinitializes the printer to the initial conditions determined by the
value of
n2.
The value of n2 is the sum of the values given below for the desired
characteristics.
Function n value
Disable alarm 32
Auto CR with LF 16
Auto LF with CR 8
12-inchforms
4
Slashed zero
2
Character set #2 1
The value of
nl should be 3,22,35,36, or 177.
120
To Next Page
Loading...
