Chapter 6 — Troubleshooting
This section shows a list of check points to follow if your printer is not
working properly. It also includes details of some routine maintenance
operations you can perform yourself. It is not, however, a complete service
manual. Call your authorized service center if you are unsureof your ability
to carry out any maintenance or servicing operations on the printer.
Chapter 7 — Optional Accessories
This chapter explains the optional accessories that are available for your
printer, and how to install and use them.
Chapter 8 — Printer Control Commands
This chapter explains the different emulations provided by your printer, and
the software commands that are used to drive it. This section is of use if you
arewriting ormodifyingprograms totakeadvantageoftheprinter’s features.
Chapter 9 — Download Characters
This chapter explains the procedures to create your own characters.
Chapter 10— MS-DOS and Your Printer
Since the PS/2 or PC-AT family of computers running under MS-DOS is
currently the most popular configuration of microcomputer, we have in-
cluded a few hints and tips to help you use your printer with such systems.
Since virtually all PCs are sold with a Microsoft BASIC interpreter, we have
also included some hints, and a sample program in this language to demon-
strate the capabilities of the printer.
Chapter 11— Reference
This section provides references for your printer, such as specifications, the
pinout of interface connector, and the character tables.
The character table charts give the different character sets available.
To Next Page
Loading...
