● Incorrect number of lines on a page
Probable Cause
Paper is adjusted
incorrectly.
Paper has shifted
backwards after
several forms
printed correctly.
Incorrect emula-
tion is selected.
Problem with the
application
program.
Distance printer
must pull paper
is too far.
Paper is getting
stuck on cables.
Action
Set the top of form. See “Top of form” in Chapter 4.
Readjust forms.
Select the other emulation with the EDS setting.
See Chapter 5.
Refer to your application program manual.
Move paper closer to the printer.
Move the paper away from any wires or cables.
● Line length is wrong; Graphics do not print; Lines are not starting at left
margin
Probable Cause I Action
Incorrect emula-
tion is selected.
Problem with the
application
program.
Select the other emulation with the EDS setting.
See Chapter 5.
Refer to your application program manual.
60
To Next Page
Loading...
