MAINTENANCE
Essentially,yourprinter isarobust piece of equipment, but shouldbe treated
with a modicum of care in order to avoid malfunctions. For example:
●
●
✎
●
●
Keep your printer in a “comfortable” environment. Roughly speaking, if
you are comfortable, then theenvironment is suitablefor yourprinter (see
Chapter 2).
Do not subject the printer to physical shocks or excessive vibration.
Avoid over-dusty environments. Dust is the enemy of all precision
mechanical devices.
To clean theexterior oftheprinter, useacloth barelydampened witheither
water with a little detergent or a little alcohol, but do not allow any liquid
to fall inside the printer.
The interior of the printer maybe cleaned with a small vacuum cleaner or
a compressed-air aerosol (sold for this purpose). When performing this
operation, be sure not to bend or damage any cable connections or
electronic components.
64
To Next Page
Loading...
