6. Lower the rear side of the Automatic Sheet Feeder and attach it to the
holder shaft.
7. Install the printer cover provided with the Automatic Sheet Feeder.
r
Printer
I
Figure 7-4. Install the printer cover.
8. Insert the hopper attachment on top of the hopper support section as
shown in Figure 7-5.
Figure 7-5. Insert the hopper attachment
9. Insert the stacker attachment into the holder on the front part of the sheet
feeder.
NOTE: The flat sideoftheattachment shouldbe locatedtotherear,asshown
in Figure 7-6.
Now, you can use the ASF by installing the paper stack into the hopper.
67
To Next Page
Loading...
