EasyManua.ls Logo

Star Micronics NX-1000 - Page 64

Star Micronics NX-1000
123 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Insulation resistance
10 megohms between AC power line and
chassis
Dielectric strength
Withstands I kVAC rms at 50 or 60 Hz
between AC power line and chassis for
at least 1 minute
n Environmental Requirements
Operating temperature
5 to 40°C (41 to 104°F)
Operating humidity
10% to 80% (no condensation)
Storage temperature
- 30 to 65°C (- 22 to 149°F)
Storage humidity
10% to 95% (at 40°C) (no condensation)
n Option
Automatic sheet feeder
n interface Signals
gna’
ame
I Direction Function
Goes from High to Low (for at least 0.5
microseconds) when data are valid.
Eight-bit character data. DATA8 is the
most significant bit; DATA1 is the least
significant bit. High is logic 1 and Low is
logic 0.
OUT
data.
runs out of paper.
rmanently by turning
13
SELECTED OUT
14-15 N/C
16 SIGNAL
GND
17
cGHNADssls
High when the printer is on-line.
Unused
Signal ground.
I+$tezerassis ground, isolated from sig-
g
-
56

Table of Contents

Related product manuals