Absolute horizontal tab in columns
Mode 1 ASCII
Decimal
Hexadecimal
<ESC> “f’ “0” n 27 IO? 48 n 1B 66 30 n
Both
<ESC> “f CO> n 27 102 0 n 1B 66 00 n
Moves the next print position to column n from the left margin, where
n is between 0 and 127.
GRAPHICS COMMANDS
Print sing/e-density &bit graphics
Modt
t
Both
?I ASCII
I
Decimal
I
Hexadecimal I - -
<ESC>
“K” nl n2 27 15 nl n2 1B 4B nl n2
ml m2
ml m2 ml m2
Prints bit-image graphics at 60 dots per inch horizontally. The graphic
image is 8 dots high and nl + n2 x 256 dots wide. Maximum width is
8 inches (480 dots). ml, m2, . . . are the dot data, each a l-byte value from
0 to 255 representing 8 vertical dots, with the most significant bit at the
top and the least significant bit at the bottom. The number of data bytes
must be nl + n? x 256. Dots beyond the right margin are ignored. At
the end of bit-image printing the printer returns automatically to character
mode.
Print double-density &bit graphics
Mode ASCII
Decimal Hexadecimal
<ESC> “L” nl n2
27 76 nl n2 1B 4C nl n2
Both
ml m2
ml m2 . .
ml m2
Prints bit-image graphics at 120 dots per inch horizontally (maximum
960 dots wide). See < ESC > “K” for other information.
Print double-density, double-speed 8-bit graphics
Mode ASCII
Decimal
Hexadecimal
<ESC>
“Y” nl n2 21 89 nl n2
1B 59 nl n2
Both
ml m2
ml m2 . ml m2
Prints bit-image graphics at 120 dots per inch horizontally (maximum
960 dots wide), skipping every second dot in the horizontal direction.
See < ESC > “K” for other information.
80
-
To Next Page
Loading...
