Select IBM character set
Mode
ASCII
Decimal
Hexadecimal
< ESC >
“t” “ 1”
27 116 49
IB 74 31
Std.
< ESC >
“t” <I>
27 116 1
IB 74 01
Selects an IBM character set (character set #2 unless an < ESC > “7”
command has been received). Ignored in IBM mode, since the IBM
character set is selected automatically.
Select IBM character set #7
Mode
ASCII
Decimal
Hexadecimal
Both
<ESC>
“7” 27 55 IB 37
.-
Selects IBM character set #l. If the standard character set is currently
selected, this command remains dormant and takes effect at the next
< ESC > “t” 1 command. In IBM mode. character set #l is the power-up
default if DIP switch l-7 is OFF.
Select IBM character set #2
Mode ASCII Decimal Hexadecimal
Both 1 <ESC>
“6” i 27 54 11B 36
Selects IBM character set #2. If the standard character set is currently
selected, this command remains dormant and takes effect at the next
< ESC > “t” 1 command. In IBM mode, character set #2 is the power-up
default if DIP switch l-7 is ON.
Select international character set
Mode ASCII Decimal Hexadecimal
Std. <ESC>
“R” n
27 82 n 1B 52
n
IBM IFS>
“R” II
28 82 n 1C 52
n
Selects an international character set according to the value of n.
n Character set n Character set
0 U.S.A
7 Spain I
1 France
8 Japan
2 Germany
9 Norway
3 England
10 Denmark II
4 Denmark
I 11 Spain II
5 Sweden
12 Latin America
6 Italy
13 Denmark/Norway
64
To Next Page
Loading...
