Select fixed spacing
Mode ASCII
Decimal
Hexadecimal
<ESC> “ ”
P “0” 27 112 48 1B 70 30
Both
<ESC> “ ”
P co> 27 112 0 1B 70 00
IBM <ESC> “P” co> 27 80 0 1B 50 00
Causes subsequent characters to be printed with fixed character spacing.
Ignored if the Print Pitch switch was pressed during power-up.
Select master print mode
Mode ASCII
Decimal Hexadecimal
Both <ESC>
“,W
n 27 33 n 1B 21 n
Selects a combined print mode according to the value of n. The value
of n is the sum of the values given below for the desired characteristics.
Examples: n = 1 gives elite; n = 9 (1 + 8) gives emphasized elite; n
= 137 (1 + 8 + 128) gives underlined emphasized elite.
Function n value
Underline
128
Italic [*l] 64
Expanded 32
Double strike 16
Emphasized 8
Condensed [*2]
4
Proportional [*2]
2
Elite [*2]
1
[*I] Ignored if the NLQ Type Style switch was pressed during
power-up.
[*2] Ignored if the Print Pitch switch was pressed during
power-up.
Increase character spacing
Mode 1 ASCII Decimal Hexadecimal
I
Std. 1
<ESC> “” n
1 27 32 n IlB 20 n
I
Increases the space between characters by n/240 inches, where n is a
number from 0 to 127. Used in microjustification.
68
To Next Page
Loading...
