Star Micronics SP298 Series - Appendix C: Memory Switch Settings

130
APPENDIX
Appendix C: Memory Switch Settings
Each memory switch is a 16-bit word store in EEPROM. For details on the
functions and settings of memory switches, see the separate Programmer’s
Manual .
The table below shows the factory settings for the memory switches.
Warning!
Changing the memory switch settings can cause the printer to fail to operate
correctly.
Memory Switch Hexadecimal Code
0 0000
1 0000
2 0000
3 0000
4 0000
5 0000
SP298Ap.fm Page 130 Wednesday, October 1, 2008 10:24 AM