136
APPENDIX
34
Compulsion
Status
OUT Compulsion signal (See page 138.)
35 +5V 2.2 k
Ω
pull-up
36 nSelectIn IN
Unused (However, this becomes a reset signal when DIP switch 1 is set
to ON and DIP switch 2 is set to OFF. See page 128 for details.)
Pin
No.
Signal Name IN/OUT Function
This connector mates with an Amphenol
57-30360 connector
Parallel interface connector (printer side)
SP298Ap.fm Page 136 Wednesday, October 1, 2008 10:24 AM
To Next Page
Loading...
