Star Micronics SP298 Series - Page 30

27
ENGLISH
Control Codes
Hexadecimal
Codes
Function
<ESC> L 1B 4C Selects page mode
<ESC> R 1B 52 Selects international character set
<ESC> T 1B 54 Selects direction for page mode character printing
<ESC> U 1B 55 Selects print direction
<ESC> V 1B 56 Designates/cancels 90˚ character rotation
<ESC> W 1B 57 Sets print area for page mode printing
<ESC> a 1B 61 Aligns position
<ESC> c3 1B 63 33
Selects the paper-end sensor for sending the no-paper
signal
<ESC> c4 1B 63 34 Selects the paper-end sensor for stopping printing
<ESC> c5 1B 63 35 Enables/disables control panel switches
<ESC> d 1B 64 Prints or feeds n lines
<ESC> e 1B 65 Prints or reverse feeds n lines
<ESC> f 1B 66 Sets single-sheet wait time
<ESC> p 1B 70 Generates specified pulse
<ESC> q 1B 71 Release
<ESC> t 1B 74 Selects character code table
<ESC> u 1B 75 Sends peripheral status (Serial I/F only)
<ESC> v 1B 76 Sends paper sensor status (Serial I/F only)
<ESC> { 1B 7B Enables/disables inverted printing
<GS> I 1D 49 Sends printer ID (Serial I/F only)
<GS> a 1D 61
Enables/disables automatic send of printer status
(Serial I/F only)
<GS> r 1D 72 Sends printer status (Serial I/F only)
SP298E.fm Page 27 Wednesday, October 1, 2008 10:10 AM