Star Micronics SP298 Series - Page 32

29
ENGLISH
Control Codes
Hexadecimal
Codes
Function
<ESC> R 1B 52 Selects international character set
<ESC> c3 1B 63 33
Selects the paper-end sensor for sending the no-paper
signal
<ESC> c4 1B 63 34 Selects the paper-end sensor for stopping printing
<ESC> c5 1B 63 35 Enables/disables control panel switches
<ESC> d 1B 64 Prints or feeds n lines
<ESC> h 1B 68 Sets/Cancels reverse line feed
<ESC> j 1B 6A Selects character width in vertical printing mode
<ESC> q 1B 71 Release
<ESC> t 1B 74 Selects character code table
<ESC> v n 1B 76 n Requests paper sensor status (Serial I/F only)
<ESC> { 1B 7B Enables/disables inverted printing
<FS> J 1C 4A Sets vertical printing mode
<FS> K 1C 4B Cancels vertical printing mode
<FS> W 1C 57 Sets/Cancels double-height, double-width printing
SP298E.fm Page 29 Wednesday, October 1, 2008 10:10 AM