Star Micronics TSP700 Series - Preventing and Clearing Paper Jams; Preventing Paper Jams; Removing Paper Jam

11 POWER SPECIFICATIONS 11 POWER SPECIFICATIONS
11.1 Power Specifications 11.1 Power Specifications
• Operating Voltage DC 24 V ±10% (Optional Power Supply: PS60-24A) • Operating Voltage DC 24 V ±10% (Optional Power Supply: PS60-24A)
• Current Consumption (at DC 24 V, Room Temperature) • Current Consumption (at DC 24 V, Room Temperature)
When Idling Approximately 0.1 A When Idling Approximately 0.1 A
When Printing Continuous ASCII Average Approximately 1.8 A When Printing Continuous ASCII Average Approximately 1.8 A
(Print Rate: Approx. 17.5%) (Print Rate: Approx. 17.5%)
When 100% Duty Continuous Printing Peak Approx. 10.0 A When 100% Duty Continuous Printing Peak Approx. 10.0 A
(When Printing) Average Approximately 5.0 A (When Printing) Average Approximately 5.0 A
(Continuous printing should be within 10 seconds.) (Continuous printing should be within 10 seconds.)
11.2 Power Connector 11.2 Power Connector
• Connector Pin Array • Connector Pin Array
Pin No. Pin No. Function Function
1 1 +24V +24V
2 2 GND GND
3 3 N.C N.C
Shell Shell Frame GND Frame GND
• Model: TCS7960 (HOSIDEN) or the equivalent. • Model: TCS7960 (HOSIDEN) or the equivalent.
• Other Party: TCP8927 (HOSIDEN) or the equivalent. • Other Party: TCP8927 (HOSIDEN) or the equivalent.
11.3 Note 11.3 Note
<Preparing Power on the User Side> <Preparing Power on the User Side>
The following must be considered to prepare a power supply on the user side, instead using the optional
power unit (PS60-24A).
The following must be considered to prepare a power supply on the user side, instead using the optional
power unit (PS60-24A).
• Power supply must be DC 24 V ±10% and more than 2.0A. • Power supply must be DC 24 V ±10% and more than 2.0A.
(Select one with a current capacity that handles printing rates when actually used.) (Select one with a current capacity that handles printing rates when actually used.)
• Take measures for the power supply to meet user side static electrical tolerance and AC noise
tolerance values, by considering the noise in the location where the printer will be setup.
• Take measures for the power supply to meet user side static electrical tolerance and AC noise
tolerance values, by considering the noise in the location where the printer will be setup.
AC Line Noise Tolerance Supplement AC Line Noise Tolerance Supplement
AC line noise testing should have the following conditions. AC line noise testing should have the following conditions.
• Noise Pulse Width: 100 ns • Noise Pulse Width: 100 ns
• Noise Shape: Rectangular Shape (Power Synch) • Noise Shape: Rectangular Shape (Power Synch)
• Noise Pulse Infusion Angle: 90° (+) and 270° (-) • Noise Pulse Infusion Angle: 90° (+) and 270° (-)
11-1 11-1