Page 40
7. Press the key to toggle between upper and lower elevation
settings. When adjusting the lower limit, the line should be at the
bottom as shown.
8. Press the elevation down key to lower the elevation until it stops.
9. With the treadmill lowered at its lowest point, use the eleva-
tion up key to raise the treadmill 4 numbers from its low point
reading. This will decrease the number displayed (i.e. increasing
elevation will display from 236 to 232).
10. Press the Burn Calories button to save the lower limit, the display
will say UPDATING.
11. Now the upper and lower limits have been set, the elevation is
calibrated. Press the twice to return to the user screen.
To Next Page
Loading...
