Page 50
This page lists out all procedures embedded in this manual. Use the icon to open the procedure
in a new browser window. Internet connection is required.
Power Issues
Procedure
Link Note
Understanding facility power requirements for treadmills
637-8490
There is tension on the power cord, or the power cord pulls itself
out over time
637-4340
E-Series Only
Selecting the correct replacement power cord on an 8 Series
637-8485
8 Series Only
The power cord is loose (E-TR & S-TRc only)
637-1589
The power cord is loose (Other E-Series & S-Series)
637-1308
Installing the IEC Power Cord Tension Relief kit on an E-TRx
637-4240
The reset button on the warm bar is sticking
637-1347
A 220v S-TRc manufactured in 2011 is failing auto-calibration or
giving Check Speed System errors.
637-1407
To Next Page
Loading...
